CMV12000 LW-AL-CMV12000C-USB3 Color
- ► CMOSIS CMV12000
- ► USB3 vision compliant
- ► CMOS, 50fps/32fps
- ► 4/3 Inch, 5.5 Microns
- ► 4096×3072, 12 MP
- ► F Mount, Global Shutter
- ► FPGA image pipeline customizable for custom camera solution.
- ► Scroll down for detailed descriptions and product specs.
The ISG LightWise Allegro USB3 CMOSIS CMV12000 color Camera – the Intelligent Solution that offers great performance and great value. On the ISG spectrum of plug & play through full customization, these cameras adapt to, and solve, your imaging needs.
The ISG LightWise Allegro USB3 CMOSIS CMV12000 Cameras brings a high frame rate performance at low cost to the imaging world by implementing a high sensitivity, pipelined global shutter CMOS image sensor. Automatic image correction and enhancement, arbitrary image scaling with anti-aliasing, independent configurable gamma correction, selectable output data formats, and lens shading correction are some of the features offered on the camera. Trigger, Strobe and Serial Interfaces are available.
Allegro cameras are USB3 Vision compliant and feature compact form factors, high resolution and high performance, along with unmatched programmability and flexibility for OEM vision system designers. We put more intelligence in our smart camera with large FPGAs, image buffers and other features to allow customization and enhanced performance.
In addition to providing plug-and-play compatibility with industry standard USB3 Vision applications, Allegro cameras also differentiate from the competition by integrating the ISG Image Pipeline in the on-board FPGA which can be modified to provide a custom camera solution. Since Allegro OEM cameras are easier to integrate, you will get your vision systems to market faster, with better performance and higher margins. Our customers integrate Allegro cameras into their products with confidence that the solution is scalable for future feature enhancements, providing a market advantage over their competition.
Image Sensor Model CMV12000 Sensor Format 4/3 inch Max Resolution 4096 x 3072 Max Frame Rate 32 fps Burst Frame Rate 50 fps into internal buffer Pixel Size 5.5 x 5.5 µm Shutter Global Vision Standard USB3 Vision™ Specification v1.0 Analog-to-Digital Converter On-Chip 8,10, or 12-bit ADC Sensor Input Clock Range 5 - 48 MHz and 50 - 480MHz (LVDS) Video Data Output 8,10, or 12-bit digital data Image Data Formats YUV, YCbCr422/400, RGB8/565, processed Bayer8/10/12, Mono8/10/12/16 including packed. FPGA Altera Cyclone V On-Board Memory 256 MB Sensor S/N Ratio & Sensor Pixel Dynamic Range 60 dB and other High Dynamic Range Modes Available Partial Image Modes 2 x 2 Binning is supported. Programmable region of interest capability. Gain Control Analog Gain & Digital Gain (programmable) Shutter Speed Automatic / Manual / One-push modes, programmable via software, 0.03ms to 1S Longer exposure (integration) times can be supported if needed.
auto exposure table
Synchronization via external trigger Trigger Latency / Jitter Latency TBD / Jitter +/- 0.5 micro-second (to be measured) Interface Port USB3 General Purpose I/O Port 12 Pin 7mm Push-Pull Connector
One Programmable Opto-Isolated Trigger Inputs
Two Programmable Opto-Isolated Strobe Outputs
One 3-Wire RS232
Power / Voltage USB3 Host Port, 5V +/- 10% at 0.9A max Dimensions (W x H x L) 57 mm Width x 57 mm Height x 80.55mm Length Mass 303 grams, (without optics) Lens Mount F-Mount Adjustable Back Focal Length Optional Emissions Compliance CE, FCC, RoHS Operating Temperature -0° to 50° C Storage Temperature -30° to 70° C Vibration Resistance 10 G (14 Hz to 200 Hz) LED Indicator Status and power monitoring
Enclosure Pre-drilled mounting holes
Tripod mount available
Heavy duty aluminum
Sealed Sensor Cavity
Warranty 4 years – Industry leading