The ISG LightWise Allegro GIGE CMOSIS Camera – the Intelligent Solution that offers great performance and great value. On the ISG spectrum of plug & play through full customization, these cameras adapt to, and solve, your imaging needs.
The ISG LightWise Allegro GIGE CMOSIS Cameras brings global shutter high frame rate performance at low cost to the imaging world. The camera utilizes the industry standard GIGE Vision interface.
The cameras offers High Frame Rate Video with Global shutters at 2Mp and 4Mp resolutions. Automatic image correction and enhancement, arbitrary image scaling with anti-aliasing, independent configurable gamma correction, selectable output data formats, and lens shading correction are some of the features offered on the camera. Trigger, Strobe and Serial Interfaces are available.
Image Sensor Model CMV12000 Sensor Format 4/3 inch Max Resolution 4096 x 3072 Max Frame Rate 32 fps Burst Frame Rate 50 fps into internal buffer Pixel Size 5.5 x 5.5 µm Shutter Global Vision Standard USB3 Vision™ Specification v1.0 Analog-to-Digital Converter On-Chip 8,10, or 12-bit ADC Sensor Input Clock Range 5 - 48 MHz and 50 - 480MHz (LVDS) Video Data Output 8 or 10-bit digital data Image Data Formats YUV, YCbCr422/400, RGB8/565, processed Bayer8/10/12, Mono8/10/12/16 including packed. FPGA Altera Cyclone V On-Board Memory 256 MB Sensor S/N Ratio & Sensor Pixel Dynamic Range 60 dB and other High Dynamic Range Modes Available Partial Image Modes 2 x 2 Binning is supported. Programmable region of interest capability. Gain Control Analog Gain & Digital Gain (programmable) Shutter Speed Automatic / Manual / One-push modes, programmable via software, 0.03ms to 1S Longer exposure (integration) times can be supported if needed.
auto exposure table
Synchronization via external trigger Trigger Latency / Jitter Latency TBD / Jitter +/- 0.5 micro-second (to be measured) Interface Port USB3 General Purpose I/O Port 12 Pin 7mm Push-Pull Connector
One Programmable Opto-Isolated Trigger Inputs
Two Programmable Opto-Isolated Strobe Outputs
One 3-Wire RS232
Power / Voltage USB3 Host Port, 5V +/- 10% at 0.9A max Dimensions (W x H x L) 57 mm Width x 57 mm Height x 80.55mm Length Mass 303 grams, (without optics) Lens Mount F-Mount Adjustable Back Focal Length Emissions Compliance CE, FCC, RoHS Operating Temperature -0° to 50° C Storage Temperature -30° to 70° C Vibration Resistance 10 G (14 Hz to 200 Hz) LED Indicator Status and power monitoring
Enclosure Pre-drilled mounting holes
Tripod mount available
Heavy duty aluminum
Sealed Sensor Cavity
Warranty 4 years – Industry leading