The ISG LightWise Allegro USB3 Smart Camera line offers a full spectrum of solutions. From plug and play to custom, the Allegro is the Intelligent Solution that adapts to your need with fully maximized responsiveness & precise integration.
These cameras brings global shutter high frame rate performance at low cost to the imaging world. The camera utilizes the industry standard USB3 Vision interface. Automatic image correction and enhancement, arbitrary image scaling with anti-aliasing, independent configurable gamma correction, selectable output data formats, and lens shading correction are some of the features offered on the camera. Trigger, Strobe and Serial Interfaces are available.
Image Sensor Model SONY Pregius IMX255 Sensor Format 1 inch Max Resolution 4096 x 2160, 8.9 MP Max Frame Rate 89 fps Burst Frame Rate 89 fps into internal buffer Pixel Size 3.45 x 3.45 µm Shutter Global Vision Standard USB3 Vision™ Specification v1.0 Analog-to-Digital Converter On-Chip 10-bit ADC Video Data Output 8-bit digital data Image Data Formats YCbCr, RGB, processed Bayer, Raw8 FPGA Altera Cyclone V On-Board Memory 256 MB Dynamic Range 72 dB and other High Dynamic Range Modes Available Partial Image Modes 2 x 2 Binning is supported. Programmable region of interest capability. Gain Control Analog Gain & Digital Gain (programmable) Shutter Speed Automatic / Manual / One-push modes, programmable via software, 0.03ms to 1S Longer exposure
(integration) times can be supported if needed. | auto exposure table
Synchronization Via external trigger and software trigger Trigger Latency / Jitter Latency TBD / Jitter +/- 0.5 micro-second (to be measured) Interface Port USB3 General Purpose I/O Port 12 Pin 7mm Push-Pull Connector | Programmable Opto-Isolated Trigger Input
2 Programmable Opto-Isolated Strobe Outputs | One 3-Wire RS232
Power / Voltage USB3 Host Port, 5V +/- 10% at 0.9A max Dimensions (W x H x L) 52 mm Width x 46 mm Height x 52.6mm Length Mass 100 grams, (without optics) Lens Mount C-Mount or CS-Mount Adjustable Back Focal Length Optional Emissions Compliance CE, FCC, RoHS Operating Temperature -0° to 50° C Storage Temperature -30° to 70° C Vibration Resistance 10 G (14 Hz to 200 Hz) LED Indicator Status and power monitoring | Dual color Enclosure Pre-drilled mounting holes | Tripod mount available | Heavy duty aluminum | Sealed Sensor Cavity Warranty 4 years – Industry leading